Kasina Not Charging or Holding Charge
Tried using my Kasina after not using it for many months. Took over 8 hours to get enough of a charge to turn it on but even though it's showing charging, when I unplug it the battery level shows almost dead no matter how long I charge it. It was working if I kept it plugged in but my cord isn't long enough to get it where I need it. Now when I try to power it on, it just says "low battery" and doesn't turn on. What options do I have to fix this?
Re: Kasina Not Charging or Holding Charge
While charging, what do you see under Settings/Service for the following lines:
Batt. Voltage:
Charge Curr.:
USB Voltage:
FW:
HW:
Re: Kasina Not Charging or Holding Charge
It wouldn't go past the "low battery" screen no matter how long I charged it. I ended up doing a factory reset and updated the firmware. Now showing:
Batt. Voltage: 3:18V
Charge Curr.: 0.04A
USB Voltage: 4.88
FW: KasinaFW2.06
HW: Kasina MMS 1.2
Re: Kasina Not Charging or Holding Charge
Charge Curr. of 0.04A is WAY too low. It won't charge the Kasina properly at that level.
You should be seeing 0.50A or higher when charging (until the battery is fully charged).
First thing I would do is find another USB cable. The thicker the better.
Re: Kasina Not Charging or Holding Charge
Tried another cord and another USB plug but it's not moving past .05, mostly moving back and forth between .03 & .04.
Any other solutions?
Re: Kasina Not Charging or Holding Charge
Quote:
Originally Posted by
njames33
Tried another cord and another USB plug but it's not moving past .05, mostly moving back and forth between .03 & .04.
Any other solutions?
Likely you still have a bad USB cable.
Contact support@mindplace.com to get this resolved.
Re: Kasina Not Charging or Holding Charge
What's the actual recommended amp range for charging please?
Re: Kasina Not Charging or Holding Charge
0.25A to 1.00A (or higher, depending on the USB power supply)
Re: Kasina Not Charging or Holding Charge
I also had a charging problem today. I plugged my Kasina for several hours, and it did not charge at all ( as always, I used the cable and charger that came with the Kasina). Thanks to this thread, I saw about the "Service" display ! It showed that voltage was ok at over 4V , but Charge current was at 0.03 A, much too low.
Then, making tests with other chargers and cables, I have found that it was not the USB cable that was bad, but the charger ( the one I had with the Kasina, back in 2016, a 5V/1.0A charger, model XS-0501000W). Now, with another charger, my Kasina is charging normally, with 4,7V, and a good 0.87A.
Bottom line: check also the charger, not just the cable.
Re: Kasina Not Charging or Holding Charge
Quote:
Originally Posted by
Quantum
I also had a charging problem today. I plugged my Kasina for several hours, and it did not charge at all ( as always, I used the cable and charger that came with the Kasina). Thanks to this thread, I saw about the "Service" display ! It showed that voltage was ok at over 4V , but Charge current was at 0.03 A, much too low.
Then, making tests with other chargers and cables, I have found that it was not the USB cable that was bad, but the charger ( the one I had with the Kasina, back in 2016, a 5V/1.0A charger, model XS-0501000W). Now, with another charger, my Kasina is charging normally, with 4,7V, and a good 0.87A.
Bottom line: check also the charger, not just the cable.
Good point! Glad you got it to work.